- 产品详情
- 产品参数
- 产品评论
- 售后服务
clean Factory yacht 126622 comparison
CLEAN/c Plant launches Yacht 40mm series 126622.ps/126655 Rose gold version recently launched 1. Left/right GEN= genuine clean=clean factory products
2. Because the gray surface on the left side is in the soft light box, the color difference appears to be somewhat large, but under natural light, the similarity is as high as 95% or more, and the natural light contrast will be released behind.
3. The right blue side, compared with the real product, the blue is slightly lighter, of course, the characteristics of the radial plate surface is that the color is not the same under different light, accurately speaking, the RGB color value on a benchmark, the whole will not have too much deviation. Because the c factory in the entire radial pattern dial, such as the water ghost plate, various log plates, and the yacht plate involved in the color of the radial pattern, are consistent with the pvd plating process, the advantage is to ensure that the shipping color will not be different because of the batch, and the color difference. In addition, the coating is thin, and the solar lines on the bottom can be clearly seen, but the cost is high.
4. The ring is electroplated pvd white gold + anti-fingerprint coating, and the ring material is also changed from general brass to fine steel, that is to say, even if the ring is bumped, the coating is damaged. Show the undertone, and he's the same as white and gold. But the hardness of refined steel is higher than that of ordinary copper. It is also in the processing and cost of the full strength.
The curvature and shape of the left and right sides of the case are basically 100% similar, and the 904L fine steel bottom cover is also used, where the bottom cover and the case fit, the bottom of the case is slightly raised, which is also one of the characteristics of the yacht case, the crown part of the three-dimensional sense, and the arc three points arrangement. The same size, the same shape. In particular, the yacht's outer ring rotation feel, this time is also almost consistent with the real thing, on the basis of two-way rotating bezel, a circle of 120 small cells, every time you turn, you can feel a sense of frustration, not so stiff as the water ghost, not so strong gmt frustration. I can only imagine that. However, it is also necessary to pay attention to the use of the ring mouth because it is frosted, so there may be scratches, which is inevitable. The rim is also easy to dirty, use hand sanitizer + soft toothbrush to clean.
The strap is matched with the case up and down, the distance gap, in each style, is not the same, so it is the purchase of the original disassembly number, to cooperate, you can see the front of the case and the place where the strap connects, the upper and lower two bends, the middle bulge, the details, enough to see the c factory in the details of the control. Strive for perfection. The case is matched with the bottom of the strap, and it can also be seen through the picture that the arc at both ends of the strap and the inner slot arc of the case should be tightly stitched.
Lettering on both sides of the case, attention attention, important things to say three times, is lettering, lettering is characterized by a stronger sense of three-dimensional, and in the middle of the slot, accompanied by the flash of stars. This is in the need to open the strap to see the place, c factory also spare no effort to make it. It can't be perfect, but it's trying. The same is true of people.
As can be seen from the above figure, the tone of the entire literal is basically similar. Do not want to just big picture as the color difference is obvious, including the real thing, the color is also infinitely close.
Six o 'clock position, blue font printing/also known as Tiffany blue, three-dimensional, tone is quite perfect. At six o 'clock, red font printing, although the picture is missing one, but can be very responsible to say, and blue is the same level.
Just lost the six point position of the blue disc red letter comparison diagram, in this diagram can be replaced. You see, I really did not blow water, red font color/three-dimensional is very close to it. I told you. Factory c won't blow shit. You can see that the overall appearance of the pointer is close to the real thing. But there are two problems with the graph above. First, the two gray/blue yachts, the clockwise Mercedes l0go, are not the same thickness. Second, the printing oil of the genuine second hand, but also inkjet traces. And two genuine seconds have this problem, after all, this is to compare the genuine, not to criticize the genuine. Perhaps a second hand that does not inkjet is not a genuine second hand
As can be seen from the figure above, the shape and color of the pointer are relatively close. The technological level is also commendable, which has been ridiculed for the shape of the needle shaft in the c factory. It was also solved on the yacht.
Watch strap part, not here to repeat. It can only be said that it has maintained a consistent level, and the chamfering of various details of the 904L fine steel is polished
Opening and closing force, and the feel of the press.
Compared with other products, more white and fine.